|
|
Build Your Online Product Catalogs?
The marine three roll bending machine produced by EZHONG introduces and absorbs the British "smith" technology, and has dual-purpose functions for rolling and bending. It mainly bends arc plates such as the ship's bow and suppressed groove hatches; the engine room of the unwinding department bending outer plate bending processing.
The shipboard rolling mill adopts a three-roll symmetrical structure. The upper roller moves vertically at the center symmetrical position of the two rollers. The hydraulic drive is realized by the effect of the oil in the cylinder on the position. The two lower rollers rotate and provide torque for the plate through the meshing of the gear of the reducer and the gear of the lower roller. Multiple sets of support rollers are designed on the underside of the two lower rollers to enhance the rigidity of the lower rollers and can be adjusted vertically. On the upper side of the upper roller, there is a rigid beam. In addition, multiple sets of support rollers are arranged between the beam and the upper roller to improve the rigidity of the upper roller. The machine is suitable for bending of curved and over-wide workpieces.
The Specification Of Ship Plate Bending Machine
Model Full-load Min Radius Rows Of Back-up Roller Main Motor Power
3R-2200Tx21000 R650mm 8 75KWx2
3R-2200Tx18000 R650mm 8 75KWx2
3R-2000Tx17000 R650mm 6 75KWx2
3R-1500Tx13500 R600mm 4(7) 55KWx2
3R-1000Tx12500 R600mm 5(6) 30KWx2
The ***ails Of EZHONG Ship Plate Bending Machine
- Individual Roll Driven: Two bottom rollers are driven by the individual reducers, which avoid mechanical interference, extend the service life of the working rolls, and improves the out-surface quality of the workpiece.
- Flexing Compensation: There is an adjustable backup roll device between the upper beam and upper back-up rollers, or the bottom beam and the bottom back-up rollers, which function is to compensate for the rolling deformation. This device is driven by the plunger-type cylinder. A load of compensation is set by th |
| Company: |
Hubei Heavy Industry Equipment Co., LTD
|
| Contact: |
Mr. ezhong group |
| Address: |
NO.1, Sihai Avenue, Ezhou City, Hubei Province, China |
| Postcode: |
436000 |
| Tel: |
86 711 3891561 |
| Fax: |
|
| E-mail: |
|
|
|
|
Home
